Free Analysis - Dry Keep

DryKeep® Moisture Management Solution Data Sheet

Providing DryKeep® with the following information will allow us to estimate the overall moisture condition, degree of polymerization of the cellulose, and the ageing rate of your power transformer. This information will be very helpful to establish a total solution to eliminate the issue of accelerated asset ageing and higher maintenance costs associated with moisture in transformers that is not constantly abated. Fields marked with an * are required.

General Data
Customer Name*
Substation Name
Contact Name*
Unit Number/Transformer Name
Email Address*
Location
Year Transformer Energized or Years in Service*
Nameplate Data
Manufacturer
Manufactured Date*
Serial Number
MVA Rating*
Oil Type (Naphthenic, silicon, etc.)
High Voltage Rating*
Oil Capacity (Gallons, Liters, Weight, etc.)*
Low Voltage Rating
Total Weight of Transformer
Weight of Cellulose (Paper) Insulation. (Please specify unit of measurement)
Oil Sample Data (at least one required, last 3 readings if possible)
*
Date of Oil Sample Top Oil Temperature Moisture Content in PPM 2-FURALDEHYDE (2-FAL) LEVEL (if available. Specify ppb or ppm) or ESTIMATED DP (if available from direct measurement)
Has the oil in this transformer ever been recondition or replaced? Examples or reconditioning include: degassing by partial vacuum, mechanical filtration, oil reclamation, etc. *
- Yes
- No
Email
This field is for validation purposes and should be left unchanged.

If you wish to submit the information via fax or e-mail, please download the PDF form here, and kindly send to your local authorized DryKeep representative or to Ed Vance at DryKeep USA at : edv@ardry.com or by fax to 912-754-2482

We reserve the right to make changes to any described details and technical data contained herein without notice. Continuous product enhancement by DryKeep® and local conditions may also result in deviations.

Date of Oil Sample	Top Oil Temperature	Moisture Content in PPM	2-FURALDEHYDE (2-FAL) LEVEL (if available. Specify ppb or ppm) or ESTIMATED DP (if available from direct measurement)

DryKeep® Moisture Management Solution Data Sheet

General Data

Nameplate Data

Oil Sample Data (at least one required, last 3 readings if possible)